页面下面写着“Download”这里。视你的操作系统选“1”或“2”对应的联接。我估计大部分人机器装的操作系统都是“Microsoft Windows”。我的本本装的是XP,所以我选1对应的连接,下载来一个文件“k10e130w.exe”,下载完成后双击这个文件完成升级文件的自解压,得到两个文件:FWDC162B.BIN和README.TXT。
安装过程在“Readme.txt”里写的很清楚。自己看吧。
Updating Procedure
1. Provide a formated SD memory card for the update software (with at least 16MB of available memory space). The downloaded file is self-extracting. The following files are extracted.
readme.txt : this document fwdc162b.bin : Firmware
Copy the above Firmware file [fwdc162b.bin] to the root directory in the SD card. If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.
2. If the camera power is on, turn it off.
3. Insert the update SD card (prepared in step 1) into the camera and close card cover.
4. Turn the camera power on while pressing the MENU button.
5. "NOW LOADING" appears in the LCD monitor, and will change to the " PROGRAM UPDATE". At the bottom of the LCD monitor,
CURRENT VERSION 1.00 / 1.10 / 1.11 / 1.20 UPDATE VERSION 1.30
will be displayed.
6. Press the four-way controller to select "YES" and press the "OK" button.
7. "UPDATING" appears on the LCD monitor and updating starts. Please do not under any circumstances switch off the power before the update is completed. It will take approximately 90 seconds to complete update.
8. When update is completed, the "COMPLETE" will be displayed at the left bottom of the LCD monitor, then turn the camera off.
9. Remove the update SD card from the camera.
10. To check the Firmware version in your camera, turn the camera on while pressing the MENU button. Check that the version displayed in the LCD monitor is "VER:1.30" The camera automatically starts up after about 5 seconds.
(Caution) When updating is finished, the update SD card still contains the Firmware file. If you want to use this card to take pictures, delete the Firmware file first.
____________________
八宝印泥:色泽朱红,鲜艳夺目;细腻浓厚,气味芬芳;冬寒不凝,夏暑不泄;燥热不干,阴雨不霉;印迹清晰,永不褪色。
|