文件夾下载地址：
http://cid-6678f4f689857ade.skydrive.live.com/browse.aspx/Nikon%20Control%20Software（不要直接按鼠標右鍵下載文件夾，打開文件夾後，單擊文件圖表，然後會有對話框彈出，提示開始下載）
主題包含兩個文件：
文件一：
http://cid-6678f4f689857ade.skydrive.live.com/self.aspx/Nikon%20Control%20Software/CCPRO20NSAEN.exe文件二：
http://cid-6678f4f689857ade.skydrive.live.com/self.aspx/Nikon%20Control%20Software/NControlPro.exe安装工序：
1.先安装自解压文件 CCPRO20NSAEN.exe
2. 将 NControlPro.exe 替换到 C:\Program Files\Nikon\Camera Control Pro 2 内
3. 将相机的USB模式从 储存改为PtP 后， 连接像机到电脑即可使用。
主要功能 本軟體對與電腦相連的藝康數碼單鏡反光相機的大多數功能進行遙距控制，可透過 USB 線、有線或無線網絡與相機連接的。支援新型藝康 D3 和 D300 的進階功能，如傳輸至電腦之前預覽及選取影像功能、實時顯示功能以及照片調控系統
。
它還支援藝康特有的影像編輯軟體 Capture NX（另購）和影像瀏覽軟體ViewNX
產品規格 (按此打開)
CPU (Windows) 1 GHz 或以上 Intel Celeron/Pentium 4/Core 系列處理器
作業系統 (Windows) 預載版本的 Windows Vista (Home Basic/Home Premium/Business/Enterprise/Ultimate) Windows XP Home Edition/Professional (SP2), Windows 2000 Professional (SP4)
RAM (Windows) 256 MB 或以上 (Windows Vista 512 MB 或以上), 建議 768 MB 或以上
硬碟 (Windows) 需要 1 GB 或以上
顯示 (Windows) 1,024 x 768 或以上, 24位元色彩或以上
其他 (Windows) 介面: USB: 只支援內置 USB 插頭 IEEE 1394: 只支援 OHCI 底板 • 需要安裝 CD-ROM 驅動 • 需要網絡連接 • IEEE 1394 連接（D1 系列）不支持 Windows Vista 系統
CPU (Macintosh) 1 GHz 或以上 Power PC G4/G5, Intel Core series/Xeon 系列處理器
作業系統 (Macintosh) Mac OS X 10.3.9, 10.4.10
RAM (Macintosh) 256 MB 或以上 (建議768 MB 或以上)
硬碟 (Macintosh) 需要 1 GB 或以上
顯示 (Macintosh) 1,024 x 768 或以上, 24位元色彩或以上
其他 Macintosh) 介面: USB: 只支援內置 USB 插頭 Firewire : 只支援 Firewire 插頭 • 需要安裝 CD-ROM 驅動 • 需要網絡連接 • IEEE 1394 連接（D1 系列）不支持 Intel 處理器的 Macintosh
英文原版说明：
This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon’s exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.
Main Features
* Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
* In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
* Enhanced viewer function enables thumbnail display of images stored in a computer.
Compatible with the new functions of the Nikon D3/D300
* Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
* Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
* It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
* 51-point AF can be controlled and displayed.
* Fine tuning of the new white balance is available.
Integration with other Nikon software
* Support for ViewNX browser and viewer software
* Support for Capture NX photo-finishing software
Compatible Nikon digital SLRs
D3, D300 Supports wired or wireless LAN when used with Wireless Transmitter WT-4.
D2 series (D2H, D2X, D2HS, D2XS) D1 series (D1, D1H, D1X D2X/D2HS/D2XS support wireless LAN when used with the WT-2.
Windows Vista support currently not available Intel Mac: only Mac OS 10.4.9 supported
D200, D100, D80, D70 series (D70, D70S), D50, D40 series (D40, D40X) D200 supports wired or wireless LAN when used with the WT-3.
